ZQ375 Static Checkweigher (6lb-500lb | 3kg-200kg)

Featuring NSF approved food-grade, fully stainless-steel construction, easy to clean IP69K full washdown Checkweigher that has been designed to work efficient on any busy food processing lines, meat cutting floors to QA inspection station.

Find your nearest distributor


Ideal heavy-washdown Static Checkweigher built to meet stringent food hygiene requirements

The legal for trade ZQ375 Static Checkweigher is fully IP69K washdown, food grade 304 stainless steel checkweigher that is NSF ANSI 3-A approved for use with raw meat, fish & vegetables. This robust ZQ375 static Checkweigher has been cleverly designed to be used within a wide range of food safe applications. Indeed, from busy meat deconstruction halls to QA monitoring stations through to fast moving process packing lines.

Robust & reliable

The scale also comes with a robust IP69K fully stainless-steel Torsion base design. It provides well over 500% overload and shock load protection to protect the loadcells from damage.

Highly visible display for operator efficiency

The indicator uses a clear easy to read IBM display with color coded under over & accept band identifiers and protected with a hard-wearing knife proof overlay.
The ZQ375 Checkweigher has been specially designed for fast repetitive work that will not overload the operator with unnecessary data. Key statistical data can be easily gathered in the background to help improve production efficiencies and provide valuable early warning of any small changes within the process line.

Fast and Accurate

Designed to provide a stable weight reading in under 0.43 of a second making it much faster than any operator can work. Fast and very simple to setup with up to 500 PLU data storage slots for storing different products accept weight bands, ideal for fast product line change overs.

Multi-connectivity to integrate with your back-office systems easily

Statistical data capture like standard deviation or X-bar-R, along with other data, can also be captured in the background. It can then be transferred out to a back-office PC, phone or tablet. This can be done using one of the following RS232, USB Ethernet or WIFI communication ports found within the ZQ375.

USB & EDS Software

Dedicated Checkweigher programs

The ZQ375 comes with 5 dedicated software Checkweighing applications designed to speed up most busy process lines or quality control inspection spot checking stations.

ZQ375 dedicated software Checkweighing applications

  • SIM Target weight Deviation program
  • MID Weight displayed Checkweighing program
  • ADV Advanced weight Checkweighing with 500 PLUs and Statistical data tracking
  • PER Percentage weight gain program
  • GRAD Grading program

SIM software application (Target Weight deviation):

A proven Checkweighing program for operator speed and efficiency, ideal for repetitive operator packed products. Designed to be fast and very simple to set up and use. This program works off a known target weight that is shown on the display as a 0 weight when set. This program provides the operator with the basic information they need for speed and efficiency. This also provides a fast indication of how far off the target point the weight is by the number of weight divisions. To also aid the operator a clear green Accept visual identifier is used to show when the product is within to accepted weight band and 6 segmented red under or oranges over identifiers to help guide the operator back to the Accept band weight.

Each 6 segmented identifiers can also be easily modified to represent the product being packed. If the operator sees 3 red under segments illuminated the operator quickly know they need to add in 3 extra items to get the reading back to within the accept weight window band.

Line setup: This application provides one of the fastest line setup features on the market today. By having a known test weight available, the line supervisor can quickly reset all the scales on the line within a minute just by placing the test weight on each scale and pressing the target key on each scale.

Limitations using this SIM software program: this program limits some of the weight data you can gather in the background from this scale due to how the scale operates. By working off a target point you cannot track data like the average Net or gross weights.

MID software Application (Actual weight positive Checkweighing)

Fully designed for both operator speed and accuracy, with the ability to gather other valuable weight data in the background, MID can be used for packing products with an operator or used by a quality inspector to monitor the lines efficiencies.

Like SIM this program, MID also works off a target weight but instead of displaying a zero weight at the target weight the MID program displays the actual weight with the green ACCEPT identifier.

Like SIM the MID program also uses a 6 segmented Red UNDER & oranges OVER identifiers to represent when the weight is outside the Accept weight window.

To aid the operator even further, each of the UNDER or OVER 6 segmented can be easily modified to represent the weight of 1 item. At a glance, the operator can quickly add or remove an item to get the weight reading back within the ACCEPT weight band. Subject to how the scale is being used it can also print weight tickets, if needed, along with other regularly used weight data like tare weights, net weights and gross weights.

Fast Line setup: programs like the SIM, the MID Program allows production staff to quickly set up each scale in seconds just by using a known test weight and them pressing the target key on each scale.

Turning off weight data so only the Check weigh identifiers are visible: designed for fast repetitive process lines. By turning off the weight data this enables the operator to remain focused for longer periods of time while increasing product line throughput.

Limits or target points: subject to the customer preference, some customers still prefer to set the ACCEPT weight window parameters the longer way by using a known weight limits and not using a target point with tolerances. Designed to work in both data entry methods, the ZQ375 can also set the accept window limits remotely from a PC or tablet.

Negative Checkweighing

This specially designed program is one of the most efficient ways to weigh out key ingredients directly from a bulk batch positioned on the scale. The operator removes the right amount of ingredient from the bulk container until the Accept light comes on. At this point the ZQ375 will automatically re-tare the display ready for the next portion of ingredient to be picked. The picked portion of ingredient can quickly be placed into its own container on a moving conveyor and the process is repeated. This basically removes the process of the operator needing to keep placing the empty container on the scales before filling.

Advanced Checkweighing software application with up to 500 PLU storage:

Ideal when you need to also gather other valuable data in the background without slowing down the operators or the process line. This software program also allows you to store up to 500 preset Checkweighing weight band parameters to help speed up line setup.

This Advanced Checkweighing package works the same as the MID program. It also allows you to run other statistical data capture programs in the background, Data capture programs like standard deviation or X bar R.

X bar R Trending data capture

Valuable way to capture data to help to track trends and performance patterns to allow you to maximize your production run times and reduce unwanted giveaway.

Standard deviation program

Used to monitor and improve efficiencies or to record a list of data. For example: number of samples that were over, under or fell within the accept band; the average sample weight; the highest and lowest weight recorded and the overall standard deviation of that pack run.

Today 80% of all static checkweighers are also used to capture data by quality inspectors to help monitor weight changes at key critical points of the process line. By being able to spot small weight changes within a process line can be vital to the product being produced. This information can also be used to give you an early warning of any possible machine failures way before it happens.

Percentage Checkweighing software application

Designed to work alongside meat brine injection machines to help track and monitor the percentage weight gain in meats.

By regularly weighing portions of meat before and after it goes through the brine injection machines. This provides the operator the vital percentage weight gain data needed to keep the injection machine running fast and efficiently. The ZQ375 can be set to display and record the actual percentage weight gain per each piece of meat tested. This data is displayed both as percentage and visually withing a Accept Weight band window.

Grading Software application

In a lot of meat deconstruction applications, reducing the amount of waste is essential to any fast-moving process line. Being able to quickly sort prime cuts of meat into required weight bands and sorting offcuts by weight for other usages can greatly reduce delays and speed up the processing.

The ZQ375 can easily be configured to work in grading mode with up to 10 different weight grading bands. This allows an operator a fast and efficient way to sort cuts of meat into different weight bands.

Find a US Distributor

Over 150 distributors around the country

Please enter your zip code or location to quickly find your nearest Avery Weigh-Tronix distributor.