Avery Weigh-Tronix operates a high capacity (500 kN – 50 tonnes) deadweight force standardising machine at its Head Office in Smethwick, West Midlands. This machine and a smaller machine of 11 kN – 1.1 tonne capacity are the major instruments in the company's force laboratory which is accredited by the United Kingdom Accreditation Service (UKAS) to ISO/IEC17025 for the calibration and testing of load cells and proving devices.
The deadweight machines may be used for the calibration of load cells and proving devices to BS EN ISO 376, ASTM E74 and accredited in-house procedures.
The laboratory offers a competitive UKAS accredited calibration service in accordance with its UKAS Schedule. Costs depend on the capacity of the device to be calibrated, the mode of calibration and the calibration standard required. They are available on application direct to the laboratory.
The deadweight machines may be used for the testing of strain gauged load cells and other force proving and measuring instruments, including Digital Force Transducers.
The machines are equipped with a temperature chamber to allow the evaluation of a device’s performance over a wide range of temperatures from -10 °C to +40 °C. This allows the laboratory to carry out UKAS accredited tests to the international OIML R60 standard.
In order to achieve the high accuracy of loading necessary for calibrating Weights and Measures approved load cells, there can be no substitute for a machine using pure deadweight to generate the test forces; hydraulic force generation and lever amplification are inadequate for the highest accuracies.
The 500kN machine comprises of four independently operated weight stacks, each of which has a number of identical weights suspended one from another by shackles. These can be sequentially deposited by hydraulic rams onto loading frames which are connected to the main cross-head of the machine, thus applying the selected load to the instrument to be calibrated or tested.
The 11kN machine comprises of two independently operated weight stacks, each of which has a number of identical weights suspended one from another by shackles. These can be sequentially deposited by an electrical drive system onto loading frames which are connected to the main cross-head of the machine, thus applying the selected load to the instrument to be calibrated or tested.
The drive systems on both machines facilitate incremental and decremental loading and the hysteresis calibration and testing of load cells and proving devices.
The masses and other components (including crosshead and weight pans) which form the calibrated load have been adjusted against reference standards traceable to national and international standards. They are also adjusted to allow for the effects of air buoyancy and the local value of gravity to apply forces in lbf units.
For further information, contact Mike Moran at Avery Weigh-Tronix, UKAS Force and Metrology Laboratory. Click here to get in touch via email, or call 0121 568 1407.
Comprehensive, all-inclusive service cover, backed by a groundbreaking uptime guarantee for weighbridges, axle weighbridges and platforms over 5-tonneRead more
Peace of mind to ensure continuous operation of heavy duty scales.Read more
Comprehensive, all-inclusive service cover, backed by a groundbreaking uptime guarantee for lighter-capacity, stand-alone scales.Read more
We offer a wide range of industrial weighing systems and solutions, backed by an extensive service network across the entire UK.
Part of a large corporate family, with 200 years experience, we market and service our products in over 80 countries across the globe.
You can contact us directly by calling:
If you are calling from abroad, please dial +44 845 307 0314