Balfour Beatty operates a large and diverse fleet of commercial vehicles in the UK ranging from small vans to 44ton articulated combinations. The plant, tools, equipment and materials carried vary widely depending on the project or contract being serviced. With such a wide variety of loads being transported, it is essential that the vehicles can be weighed accurately and efficiently, to ensure safety and comply with road transport legislation. Installing a weighbridge at each location was not financially feasible, so Central Weighing’s solution was implemented to supply ten portable dynamic weighbridges.
Adrian Wanford, Fleet Operations Manager at Balfour Beatty commented: “We first invested in two Cheklode Freeweigh scales in 2011 as a more effective method for weighing our vehicles. We quickly identified two key benefits of using these scales. Firstly, the speed of the weigh was exceptional, meaning we were able to weigh a 26 tonne truck in approximately 33 seconds.
“The second major benefit was the efficiency with which we could capture the weight data. Once the vehicles are weighed, the data is sent via Bluetooth to a control unit from which data can be downloaded in Excel spread sheet format. The data can then quickly be analysed to understand trends and more problematic vehicle applications, also it is incorporated into KPIs when reporting our vehicle weight compliance levels. This helps educate managers and drivers and ensure compliance with legislation”.
Statistics released by the Vehicle and Operator Services Agency (VOSA) in the “VOSA Effectiveness report 2011-12” showed that in that period, VOSA Enforcement officers check weighted 3239 Trucks on UK roads and found 60.6% of them overloaded. For light commercial vehicles, 87.3% of the 2090 weighed were overloaded. A large number of these resulted in fixed penalty fines and prosecutions for drivers. Such incidents would also have had further implications for the organisations involved and their Goods Vehicle Operator’s licence.
Following the success of the first two Cheklode Freeweigh systems, Balfour Beatty has invested in a further eight in 2013. Due to the ease with which the axle weighing scales can be transported around the UK, the addition of the new systems means the Field Compliance Engineers and other members of the regional Transport team can weigh more vehicles, more often.
Adrian stated: “I have made it a target this year to weigh 3000 of our vehicles on unannounced site visits, so, effectively our internal compliance team will weigh every truck and large van in our fleet at least once in 2013. I believe now, with the addition of the eight new Cheklode Freeweigh systems, we have the infrastructure in place to do this. This will make our fleet more efficient, but more importantly, it’s going to mean our trucks and vans are all safe.”
We offer a wide range of industrial weighing systems and solutions, backed by an extensive service network across the entire UK.
Part of a large corporate family, with 200 years experience, we market and service our products in over 80 countries across the globe.
You can contact us directly by calling:
0845 307 0314
If you are calling from abroad, please dial +44 845 307 0314
ITW Limited trading as Avery Weigh-Tronix
Foundry Lane, Smethwick, West Midlands, B66 2LP.
Registered Office: ITW Limited, Nexus House, Station Road, Egham, Surrey, TW20 9LB, United Kingdom. Company number 559693.
Producer Registration Number WEE/DD0105WV.